0.3m LC-LC 10 Gigabit Multimode Duplex 50/125 OM3 UPC Fiber Patch Cable

Length

0.3 m

Length - Feet

1

Length - Meters

0.3

Product Type

Essentials

Cable Type

OM3

Mode

Multimode

Connector Type

Standard

Fiber Strands

Duplex

Core Size

50 Micron

Connectors

LC

Package Quantity

1

Polish Type

UPC (Ultra Physical Contact)

Connector Pairs

LC - LC

Polish Type 1

UPC (Ultra Physical Contact)

Polish Type 2

UPC (Ultra Physical Contact)

Mode Conditioning

No

Jacket Color

Aqua

Fiber Cable Type

Multimode Duplex (OM3)

Core Material

Standard

Brand

CablesAndKits

Jacket Size

2.0mm

Jacket Material

OFNR (Riser)

Weight

0.03 LBR

Multimode OM3 Laser Optimized ( 50/125) | LC to LC | 1 Foot Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables. There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode, but a special version which is laser optimized. These cables are manufactured using a process that eliminates manufacturing anomalies and conditions which cause the glass cores to be prone to modal dispersion when the transmission distance is great. Modal dispersion if the optical equivalent to EMI and causes confusion at the receiving end. The binary 1's and 0's cannot be differentiated. Inside these cables you will find three basic layers. Starting from the inside, you have the core which is surrounded by the cladding. Both are protected with the jacket on the outside. Multi-mode cables have a thicker "core size". The core size is simply the thickness of the optical fiber inside the cladding. The cladding is material that surrounds that core which basically serves as the boundary for the signal, keeping the light refined to the core and not allowing it to escape. The thicker the core size, the more refraction the signal exhibits, the more signal degradation that occurs and the shorter the distance an intelligible signal can transmit. For example, these cables are 50/125. 50 is the diameter of the core, and 125 is the diameter of the cladding, both in micrometers. Lastly, the jacket is the part of the cable you see. This layer protects the cable and provides easy identification based on its color. TIA-598C recommends aqua for OM3 multi-mode. LC connections allow higher density applications based on its smaller diameter. The LC connection, commonly refereed to as  Lucent Connection, Little Connector or Local Connector, is commonly used today for uplink modules and other devices. This connector is a "snap" type, has a ferrule diameter of 1.25mm and defin ed by IEC 61754-20 . Quick Specs: OM3 Laser Optimized Multi-mode Fiber 50/125 LC to LC 1 Foot Aqua PVC (Polyvinyl Chloride) Jacket 2000M (6562 ft) @ 100Mps (can vary depending on optical transceiver, modal bandwidth and wavelength) 550M (1804 ft) @ 1Gbps (can vary depending on optical transceiver, modal bandwidth and wavelength) 300M (984 ft) @10Gbps (can vary depending on optical transceiver, modal bandwidth and wavelength) Applications: Most commonly used to connect Cisco uplink modules and various other fiber modules Uplink and riser cabling Custom Cables Available Upon Request Don't see what you're looking for? No worries! We can make custom cables to fit your requirements. Simply fill out our Quote Form and we will take it from there!