Cisco 2960S 48 Port Gigabit 370W PoE+ Switch, WS-C2960S-48LPD-L

Port Quantity

48

Series

Catalyst 2960S

Rack Units

1RU

Type

-

Frequency Range

-

Gain

-

Software

LAN Base

OSI Layer

L2

Stacking

Stackable

Hot Swappable Modules

Yes

Hot Swappable Fans

No

Hot Swappable Power Supply

No

Energy Efficient

Yes

Port Speed

10/100/1000

Ram

128 MB

Flash

64 MB

Ports

48 10/100/1000 + 2 SFP+

Min Operating Temp

23° F

Max Operating Temp

113°F

Jumbo Frame Support

9216 bytes

Predicted Reliability

198,300 hours

Mac Addresses

8K

Vlan Ids

4K

Min Storage Temp

-13ºF

Max Storage Temp

158ºF

Operating Humidity

10 to 95% (noncondensing)

Storage Humidity

10 to 95% (non-condensing)

Ac Input Voltage

100 to 240 VAC

Fans

Internal

Stacking Bandwidth

20 Gbps

Unicast Routes

-

Available PoE Power

370W

Forwarding Rate Based On 64-Byte Packets

101.2 mpps

Power Specifications

100-240VAC, 2-5A, 50-60Hz

Uplink Interfaces

2 SFP+

Switched Virtual Interfaces (SVI's)

-

Brand

Cisco

Total Multi-Gigabit Ethernet Ports

48 mGig

Weight

20.69 LBR

WS-C2960S-48LPD-L | Cisco 2960S 48 Port Gigabit 370W PoE+ Switch | Graded B Grade B Switches are fully tested, fully functional, and perform to manufacturer specifications. They may show cosmetic defects or imperfections such as scratches, scuffs, dents, or discoloration, but these do not affect performance or reliability. Flexible, secure and border-less, the Cisco 2960-S series of switches are designed to meet the needs of today’s mid-market and branch office networks. These Layer 2, EnergyWise gigabit switches are equipped with Cisco’s LAN base software and come in an array of configurations including 10/100/1000 desktop connectivity, dual-purpose uplinks, support for PoE+, Flexstack and multiple power supply options in supporting models. Flexstack is a supported feature in the 2960-S series that allows multiple "stacked" switches to act as one logical unit. When stacked, switches achieve a full duplex, 10Gbps connection. To stack, both 2960-S switches must have a C2960S-STACK module installed and a CAB-STK-E-xxM cable connecting them. This configuration allows up to four switches to be connected together allowing a single point of management, redundancy and reduction in the TCO (total cost of ownership) by offering a scalable, build-as-you-go solution. PoE+ (or 802.at) builds on the legacy of Cisco's industry leading PoE (802.af) and Inline Power legacy. This new power delivery method allows 30W of power per port to PD's (Powered Devices) as opposed to 15.4W with standard PoE. This decreases deployment costs and TCO by eliminating the need for power runs to the PD instillation location. Automatic power negotiation manages power consumption and keeps wattage transmission from the switch at the appropriate levels eliminating electrical waste. In addition, PoE+ devices are backwards compatible with older PoE 802.3af, so you get the best of both worlds! Cisco EnergyWise architecture is another way CISCO 2960-S switches add value to your investment. This technology allows IT managers to measure, analyze and monitor the power consumption across the corporate network reducing power consumption and further eliminating waste. Cisco EnergyWise uses a proprietary, network based method of domain name queries to gather data and apply actions and rules. The Cisco WS-C2960S-48LPD-L provides 24 ports of PoE at 15.4W, 48 ports up to 7.7W and up to 12 ports of PoE+ up to 30W each. The 24LPD-L also has either (2) 10 Gigabit Ethernet or (2) 1 Gigabit SFP ports for up-linking via the dual purpose port configuration. Supported Protocols: AutoQoS (Automatic QoS) Stacking Master Configuration Management (for FlexStack) DHCP (Dynamic Host Configuration Protocol) DTP (Dynamic Trunking Protocol) PAgP (Port Aggregation Protocol) LACP (Link Aggregation Control Protocol) MDIX (Automatic media-dependent interface crossover) UDLD (Unidirectional Link Detection Protocol) SDM (Switching Database Manager) IGMP (Internet Group Management Control Protocol) MVR (Multicast VLAN Registration) Storm Control (Per-Port Broadcast, Multicast and Unicast) Voice VLAN VTP (VLAN Trunking Protocol) RSPAN Remote Switch Port Analyzer Layer 2 Traceroute TFTP (Trivial File Transfer Protocol) NTP (Network Timing Protocol) Package Includes: CiscoWorks LAN Management Solution Cisco TrustSec Cisco Network Assistant Cisco Catalyst Smart Operations Borderless Networks